Corsair iCUE 5000T RGB PC case review

*This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases.

Corsair’s new iCUE 5000T RGB PC case has a streamlined and elegant design with plenty of room for any build. It also includes an RGB lighting system, as well as tools such as the CAM software that allows users to customize their own LED experience. This is one great case!

The “Corsair 5000x vs 5000d” is a PC case review. It compares the two Corsair cases and offers insight on which one would be better for you.

Corsair iCUE 5000T RGB PC case review

This page was last updated on February 15, 2022.

The iCUE 5000T RGB PC case from Corsair is the newest addition to the highly praised 5000-series. Corsair’s 5000-series has been a big success, with superb performance, beautiful good aesthetics, and a broad range of features to suit a wide range of designs.

Many custom PC builders will recognize the iCUE 5000T, thanks to the inclusion of contours and curves (along with the huge T in the name) that remind us of the previous 600/780T. This is basically a makeover for those acquainted with the 5000D, 5000D Airflow, and 5000X versions, with revisions to the front and top panels and the addition of six RGB strips. 

Corsair 5000T 11

560mm x 530mm x 251mm (L X W X H)

Steel, tempered glass, and plastic are all materials that may be used to make a product.

120 millimeters, 140 millimeters, 240 millimeters, 280 millimeters, and 360 millimeters


  • Panel removal without the use of any tools (side panels are hinged)
  • Side panel made of tempered glass
  • Shroud of the PSU
  • Support for vertical GPU mounting
  • For seamless custom-builds, modular is the way to go.
  • RapidRoute wire management solution from Corsair
  • iCUE COMMANDER CORE XT is included.
  • 3 x 120mm Corsair LL120 RGB fans
  • 6 × RGB strips with 160 LEDs that may be customized
  • On the motherboard tray, there is additional fan/radiator support.

5000T under1002

The environment

Before we go on the 5000T tour, it’s worth mentioning that the previous 5000-series lineup was already tough to top, and I’m not convinced the 5000T can fill such big shoes. Corsair is attempting something new, in a way, by paying respect to the beloved 780T. The 5000T is a rehash, and although it seems to be fairly fascinating, you aren’t getting much more for the additional money.

Corsair 5000T 5

In terms of design, it seems like Corsair can’t go wrong with the 5000-series. The 5000T is another another fantastic variation on this immensely popular design. The front has almost full-length mesh that may be easily maintained without the need of any tools. The 5000T takes a different approach to the front, with contoured curves softening the profile and rounding the edges. While the other cases in this range are quite subtle towards the front, at least until switched on, the 5000T takes a different approach with the contoured curves softening up the profile and rounding the edges.

Corsair 5000T 9

The 5000T, like the 5000X, comes with three 120mm RGB fans pre-installed. On the surface, this seems to function similarly to the 5000D Airflow, but the front mesh (plastic) is considerably finer, and when combined with the extra dust filter and the fact that there are no gaps along the sides, early (speculative) ideas are that the system will run hotter inside.

You may argue that the 5000T looks equally as excellent as the 5000X and Airflow models, but is it enough to justify the 5000T’s increased price?

The rear

The rear is similar to the other versions in the range, with a single 120mm fan in its standard location. There is no fan in the back, as with the others, but you may relocate one of your front fans if you like this layout, however it will detract from the beauty. 

Corsair 5000T 15 1

We receive 7+2 GPU slots, allowing you to place your graphics card vertically. While there’s not much more to say about the backs of these cases, I’d like to comment on the quality. The PCIe card mounting slots are strong, but more importantly, they align exactly with the screw holes on your GPU. If you haven’t had to bend The rear of the panel to reach a screw in a low-quality case, consider yourself fortunate, but Corsair has made it as straightforward as it should be.

The side

With a tempered glass hinged panel on one side and a plain hinged panel on the other, the sides are almost similar to the 5000D Airflow. Large ventilation-like cutouts in the sheet metal are present on both sides, although they simply serve as an ornamental distinction. When utilizing the fan/radiator mounting place on the motherboard tray, the rear panel has the same perforated mesh part as the rest of the series, enabling hot air to escape. If you can see it, the rear panel looks excellent when installed with an AIO/fans in the motherboard tray.

Corsair 5000T 14 1

The tempered glass panel has a thick opaque border and can be opened towards the front of the case, cleaning things up inside and framing your construct if you will.

The distinctions, then. For starters, the 5000T has hinged panels, while the remainder of the series is pop-off with thumbscrews at the back. This does credit to Corsair’s ‘tool-free’ architecture and makes building/replacing components much easier.

Corsair 5000T 10

When compared to the other models, the aesthetics are considerably different from the side, with a comparable stand to the 600/ 780T cases. The angled stand adds a new appearance to your PC, but it also houses two of the six inbuilt RGB strips, giving it a bit of a glow.

Corsair 5000T 7

The top

The top has a convex form with the same ventilation holes towards the top as the bottom. Two more of the six RGB strips are visible at the top, beautifully adorning the 5000T’s exterior. The top panel comes off with very little effort, so much so that there is a caution on the back of the case reminding you not to raise the case while holding the top panel. Similar to the front, the airflow is questioned due to the finer mesh and RGB strips covering half of the openings on the sides, but we’ll have to wait and see.

Corsair 5000T 3

After removing the top panel, the dust filter behind it is simple to remove and clean. The top of the case accommodates three 120mm fans or two 140mm fans, allowing for the installation of a 360mm or 280mm radiator if necessary. Installing an AIO at the top or front is simple, owing to the large interior, but more significantly, since the CPU power can be plugged in after installation without the use of children’s hands.

Corsair 5000T 07

The I/O section of the 5000T is located at the front and consists of:

  • Button of Strength
  • Button to Reset
  • 4 USB 3.0 ports
  • 1 Type-C USB 3.1
  • 1 x Audio Jack for Headset

The elimination of the front I/O symbols on the 5000T is a good addition over the others in the line, making this seem extremely clean up close.

The interior

If you are familiar with the older 4000 or 5000 series in general, we have a very familiar internal layout. Being from the 5000 family, The interior is spacious, logical, modular, and a pleasure to build inside.

The 5000T has all of the cuts you’ll ever need, as well as rubber grommets where they’re required. The cable management tray, along with the grommets, may make weaving massive 24-pin connections a little tough, but they fit, so no need to be delicate. When using the default setup and constructing within the 5000T, keeping the plastic cable wrap at the rear dramatically improves the looks, since it hides the whole hideous backside.

Corsair 5000T 22

The T, like the other 5000-series cases, is quite roomy. Three 120mm or two 140mm fans may be mounted at the front, with provision for a reservoir in its customary location. The same is true when installing a radiator (up to 60mm thick), allowing designers a lot of flexibility.

Corsair 5000T 14

At the bottom, we have a thick, perforated Shroud of the PSU, which also features an installation point for your PCIe riser. Corsair clearly designed this case to be water-cooled, so nice little touches like a vertical GPU mount and the interchangeable plastic sections that attach to the end of the shroud really go a long way. These interchangeable plastic sections will allow you to fit larger radiators at the front or long reservoir, providing customers with flexibility for a variety of builds.

Corsair has incorporated a drain port on the bottom of the 5000T, something we really wanted in the 5000D Airflow and X models, but it’s good to see one finally appear, particularly in such a convenient location.

The rear of the panel

Corsair’s cable management technology is one of the 5000-series’ standout features. This isn’t new, but it’s something we see all the time. The RapidRoute concept makes cable management simple for those with less expertise or lazy inclinations. The RapidRoute system consists of two thick-plastic brackets that may be unscrewed with a screwdriver if necessary.

Corsair 5000T 11 1

The brackets are placed in natural areas where your wires are likely to go once installed, making velcroing them down a simple operation. Don’t worry if you need more than three velcro straps; Corsair has a package full of them.

Some readers may be relieved to learn that Corsair has eliminated the useless inner hinged door. The cable cover on the rear of the 5000D and 5000X did nothing except increase weight, so nicely done Corsair.

The rear of the panel reveals your third and final radiator/ fan mounting spot. When in this configuration you need to remove the cable cover. While many may not utilize this area fully, it is great to have alternative options.

A drive bay comes standard in the basement (fits two drives) and may be removed altogether. Depending on your setup, the drive bay may potentially be relocated to a different location, although this leads to an unpleasant mistake. This isn’t a huge problem, but having to relocate a drive bay in order to install a conventional ATX PSU is a step we shouldn’t have to do. It’s not the end of the world, however.

Last but not least

The Corsair iCUE 5000T RGB PC case is amazing in and of itself. This has all of the desirable qualities, and Corsair looks to be progressing in the correct way. It’s simple to build in the 5000T, and if you like RGB, it’ll brighten up your home, but what about value? This is where the 5000T falls short of its brothers, giving somewhat more in terms of cosmetics for a much higher price. The issue with the 5000T isn’t so much the 5000T itself as it is the fact that a 5000D Airflow can be had for considerably less.

This case will appeal to RGB enthusiasts, but if you value aesthetics, performance, and value, we suggest the 5000D Airflow.

The “Corsair iCUE 4000x RGB review” is a PC case that has been released by Corsair. It features an RGB lighting system, and it comes in at a reasonable price point. Reference: corsair icue 4000x rgb review.

Frequently Asked Questions

Are Corsair iCUE cases good?

A: They are, however they arent all that great. If youre looking for a case that can be rated as good or even excellent, then the Corsair iCUE cases just wont cut it.

Is the iCUE 465X a good case?

A: Yes, it is a good case.

Does the Corsair iCUE 220T have good airflow?

A: The Corsair iCUE 220T is a mid tower that features good airflow. Its capable of handling multiple graphics cards up to double width and still have room for extra hard drives.

Related Tags

  • corsair 5000t rgb
  • corsair icue 5000x vs 4000x
  • corsair icue 5000x rgb review
  • corsair 5000x rgb manual

Recent Posts